How do I wire up the Single/Dual Stage Boost Controller?

• Related Articles

• I’m experiencing excessive/fluctuating boost with the Boost Tee.

  (The following answers also apply to Dual and Single Stage Boost Controllers) • Check that the boost controller is installed so that the arrow points toward the wastegate actuator. • Check the joining hoses for splits, cracks or loose connection and ...

• Do I need one solenoid for my electronic boost controller, or is two preferable?

  This question is best directed to the person doing the install and configuration of the electronic boost controller. In many cases, the primary consideration in answering this question is which option will allow for a greater reduction in the length ...

• What boost controller should I get?

  This complex question requires additional information about your intended use for the vehicle and the controller. Mechanical boost controllers are simple to operate and extremely reliable, with little maintenance and tuning required. Electronic ...

• Are there any ways to test my boost controller to make sure it is working properly?

  Yes, we offer spare parts and accessories for our boost controllers. This includes mounting brackets, toggle switches, wire harnesses, and more. These are all available in the “Spares and Accessories” portion of our website.

• What’s the difference between a “Dual Port”, a “Supersonic”, and a “Plumb Back” valve?

  Our “Dual Port” valves split the released compressed air, recirculating a portion of the air into the intake tract and removing the remaining air into the atmosphere. A “Supersonic” valve vents 100% of the compressed air charge into the atmosphere. A ...