I'm re-mounting my eBoost 2 and I don't want to lose the current setup. Will the settings be retained with the unit unplugged?

• Related Articles

• I’ve accidentally zeroed all the dials, what are the factory settings on the FCD2?

  Before setup, the unit should be set to the following settings, Clamp=10, Release=10.

• How are the eBoost 2 and the eBoost Street different?

  The eBoost Street and E-Boost 2 perform many of the same base functions, but some differences are. The eBoost Street is capable of storing 2 boost settings which can easily be switched by using the gauge knob/button or by use of an external switch ...

• The part number I need isn’t offered in the PSI rating I want. What should I do?

  Many of the Turbosmart wastegates are offered in pre-set PSI ratings, such as 7 PSI or 14 PSI. In most cases, these wastegates can be customised to different spring pressures (either higher or lower) at little or no additional cost. We recommend ...

• I don’t see a valve available for my specific model. Do you offer any universal valves?

  Yes, some of our valves are ONLY offered as universal parts (such as the RacePort), and many of the other valve types are offered in universal fit forms, in addition to our vehicle-specific versions.

• Will fitting an external Wastegate require any custom fabrication?

  Yes, fitting an external wastegate will require fabrication of a custom manifold and or modification to an exhaust manifold.