The part number I need isn’t offered in the PSI rating I want. What should I do?
Many of the Turbosmart wastegates are offered in pre-set PSI ratings, such as 7 PSI or 14 PSI. In most cases, these wastegates can be customised to different spring pressures (either higher or lower) at little or no additional cost. We recommend calling our office, or your local Turbosmart supplier, if you do not see a unit offered in a PSI rating that you are intending to order.
Related Articles
I don’t see a valve available for my specific model. Do you offer any universal valves?
Yes, some of our valves are ONLY offered as universal parts (such as the RacePort), and many of the other valve types are offered in universal fit forms, in addition to our vehicle-specific versions.
I'm re-mounting my eBoost 2 and I don't want to lose the current setup. Will the settings be retained with the unit unplugged?
No, you won’t lose anything, but if you are worried, take 5-10 minutes and note down all your settings. it’ll be helpful if you do accidentally change something.
Do I need one solenoid for my electronic boost controller, or is two preferable?
This question is best directed to the person doing the install and configuration of the electronic boost controller. In many cases, the primary consideration in answering this question is which option will allow for a greater reduction in the length ...
How do I pursue a warranty inspection?
If you are experiencing a problem with your Turbosmart product, our first recommendation is always to reach out to the support team at your local office. In many cases, a product issue can be resolved without having a warranty inspection performed. ...
Why/when/how would I adjust the valve?
Most valves come pre-adjusted to the correct setting for your vehicle. The two possible extremes that may require adjustment are a valve that is too stiff for your application or a valve that is too soft. If the valve is too stiff, your vehicle will ...