TS-0101-2023 - Vacuum - 30 PSI Boost Gauge

TS-0101-2023 - Vacuum - 30 PSI Boost Gauge


Product Name:
GBCV Gauge
Product Description:
Vacuum - 30 PSI Boost Gauge
Product Number:
TS-0101-2023

Important Notes

  1. Turbosmart accepts no responsibility whatsoever for incorrect installation of this product which is potentially hazardous and can cause serious engine
    damage or personal injury.
  2. Please thoroughly read and understand these instructions before commencing this installation
  3. Ensure the engine is cold prior to installation.

Recommendations

  1. Turbosmart recommends that your Gauge is fitted by an appropriately qualified technician.
  2. GBCV Gauge Mount Cup (TS-0101-2024) Sold separately.


Instructions

  1. Connect the black wire to a suitable ground on the chassis
  1. Connect the Red Wire to a 12VDC ignition source. If gauge is too bright for application, the orange dimming circuit can be also used
  1. Connect the Orange wire to the +12VDC illumination wire of the headlights or stereo.
  1. Find a suitable vacuum source on the inlet manifold of the engine, e.g. pressure source to the fuel pressure regulator
  1. Install the supplied tee piece in between the pressure source line, make sure that the pill in the tee piece is towards the Gauge
  1. Connect the tee piece to the Gauge with the supplied vacuum tube
  1. Start engine and check for leaks and illumination as well as dimming.