Why is it important to check the Air-Fuel ratio while setting the desired boost pressure?

• Related Articles

• Can I install a Fuel Pressure Regulator myself?

  While a fuel pressure regulator can be fitted relatively easily, Turbosmart recommends its FPRs are fitted and tuned by qualified technicians as an incorrect setting of fuel pressure may cause your engine to run lean with the potential for ...

• How much boost can a valve hold?

  Our valves are not rated by the amount of boost pressure that they can hold. A good rule of thumb is that if the hose supplying air into the top chamber of the valve is large enough to supply an adequate volume of air, then the valve itself should ...

• I’m experiencing excessive/fluctuating boost with the Boost Tee.

  (The following answers also apply to Dual and Single Stage Boost Controllers) • Check that the boost controller is installed so that the arrow points toward the wastegate actuator. • Check the joining hoses for splits, cracks or loose connection and ...

• What are the benefits of an electronic boost controller?

  Electronic boost controllers have many benefits not found in manual controllers. Our electronic boost controllers have an Overboost Protection function which acts as a safety feature. This is to prevent, boost over your desired maximum. They also can ...

• What is the purpose of a boost controller?

  Boost controllers increase the boost generated by the turbocharger above what the wastegate would usually allow with its designed spring pressure/rate. Additional features are designed into the electrical units we produce. However, the primary ...